VERKLINE WAS-410 Front Caster Adjustable Control Arms Kit for TOYOTA GR Supra / BMW Z4 (G29)

Advantages

• Easy roller adjustment with a jack screw.
• Increased strength and rigidity for improved handling.
• Rubber won't bend, you won't lose the defined geometry during alignment.
• You don't have to replace the entire arm in case of ball joint wear. This uses easily replaceable, high quality spherical bearings.
• The weight is about the same as OEM, but the functionality is higher.
• This is a bolt-on kit, no modifications to the vehicle are required.
• The booster is supplied assembled, with the length originally specified.
• The solid pin and adjustment sleeve are made of high strength steel.
• CNC machined handle made of 6082 T6 aluminum.
• High quality spherical bearings for motorsport with increased articulation capability. Manufactured in Europe.
• Protects the crossmember from strong lateral vibrations that can occur in a collision with a knuckle or steering link.
• Includes all necessary parts for installation on the vehicle.
• Can be used with the standard steering knuckle and subframe.

What's included in the kit

• Two aluminum front cross arms from CNC billet 6082.
• Two CNC machined aluminum brackets from CNC billet 6082.
• Two vertical pins CNC machined from Cr-Mo.
• Two adjusting lanyards made of Cr-Mo, CNC machined.
• Thin locking nuts.
• 4 high quality spherical bearings for motorsport applications.
• Lightweight aluminum spacer bushings for mounting the arm in the front subframe.
• Printed installation instructions.

Note: Due to the very high forces acting on this arm, it is equipped with a very tight fitting motorsport bearing. Once installed on the vehicle, the bearing requires a large amount of force to move, but will become weaker after about 100 km (60 miles), still providing high resistance to the forces acting on the bearing.

Note 2: Sold for off-road, track and racing applications only. Installing cross arms may result in increased noise, vibration and harshness (NVH) in the vehicle.