MISHIMOTO MMINT-STNGR-18SL Performance Intercooler Kit, KIA Stinger GT 3.3T 2018+, Silver

Description MISHIMOTO MMINT-STNGR-18SL Performance Intercooler Kit, KIA Stinger GT 3.3T 2018+, Silver

Enhance cooling performance on the 2018-2023 Kia Stinger GT with the Mishimoto Performance Intercooler Kit. The Stinger’s Lambda II GDI 3.3T engine is a strong platform, but the factory intercooling system can be a limiting factor. This kit replaces the entire intercooling system from turbo to throttle body to optimize airflow.

The Mishimoto Performance Intercooler features a robust bar and plate core, TIG-welded to cast aluminum end tanks, replacing the original tube and fin core with plastic end tanks. The core volume is increased by 94 percent, and the external fin surface area is expanded by 74 percent. The aluminum piping retains the stock material but increases the inner diameter to 3 inches for improved flow and minimal pressure drop. The piping merger manifold is overhauled with 2-inch inlets and a 3-inch outlet, resulting in a 51 percent boost in flow from the turbos while maintaining compatibility with stock recirculation valves. The piping kit is finished in a micro-wrinkle black powder coat and uses 5-layer silicone couplers.

Dyno testing showed a 29°F reduction in outlet temperatures and gains of 8whp and 8wtq on stock tuning. With a stage 1 map tune, the kit delivered a 41°F drop in outlet temperature and an additional 6whp and 8wtq gain.

Note: Installation of this kit requires permanent modification to the front air guide shrouding, part number 29135-J5000.

• Bar and plate core with TIG-welded cast aluminum end tanks
• 94% increase in core volume and 74% increase in external fin surface area
• 3-inch aluminum piping with minimal pressure drop
• Retains compatibility with stock recirculation valves

Specifications:

• Engine Codes: Lambda II GDI
• Chassis Codes: CK
• Overall Length (in): 38.7
• Overall Height (in): 7.9
• Overall Width (in): 8.1
• Inlet (in): 3
• Outlet (in): 3

Kit comes with::

• Performance Intercooler
• Hot-Side Piping Merger Manifold
• Hot-Side Intercooler Pipe
• Cold-Side Intercooler Pipe
• 6 Silicone Couplers
• 2 Application-Specific Mounting Brackets
• 2 Air Diverters
• 4 Mounting Grommets
• 8 Heavy-Duty Worm Gear Clamps
• Mounting Hardware
• Mishimoto Lifetime Warranty

Vehicle Compatibility:

• 2018-2023 Kia Stinger GT
• 2018-2023 Genesis G70 3.3T