ATP TURBO ATP-OIL-021 Фітинг подачі оливи з вбудованим обмежувачем для GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-1
ATP TURBO ATP-OIL-021 Фітинг подачі оливи з вбудованим обмежувачем для GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-2
ATP TURBO ATP-OIL-021 Фітинг подачі оливи з вбудованим обмежувачем для GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35 Photo-3

ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35

₴590.00

Shipping calculated at checkout

ATP TURBOP/N: ATP-OIL-021 GTIN: 2000000011660
In stock
Quantity:
Pickup available at ATOMIC-SHOP UA Usually ready in 1 hour

ATP TURBO ATP-OIL-021 Oil Inlet Fitting with Built-In Restrictor (0.9 mm) for GT28 / GTX28 / GT30 / GTX30 / GT35R / G25 / G30 / G35

ATOMIC-SHOP UA

Pickup available, usually ready in 1 hour

вул. Набережно-Лугова, 29
Київ
02000
Ukraine

+380444681611

-4 (-4AN) Size oil inlet restrictor fitting (0.035\" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -4AN male flare. High durability and reusable Stainless Steel material.

Use with any -4AN oil feed lines with a -4AN female hose end!

Fits Garrett GT25R, GT28R, GT30R, GT35R, GTX28R, GTX29R, GTX30R, and GTX35R series models.

Please Note: NEVER use thread sealant with this fitting. The fitting engages with the mating part and creates a \"compression\" seal once installed. Any type of liquid or thread sealant used will run the risk of plugging up the oil feed port causing oil starvation and failure of the turbo.