AEM 50-1005 Насос паливний виносної (400 л/ч) AN6 вихід - AN10 вхід Photo-1

AEM 50-1005 Inline High Flow Fuel Pump (400 lph)

₴7,938.00

Shipping calculated at checkout

AEMP/N: 50-1005 GTIN: 840879024086
Only 1 unit left
Quantity:
Pickup available at ATOMIC-SHOP UA Usually ready in 1 hour

AEM 50-1005 Inline High Flow Fuel Pump (400 lph)

ATOMIC-SHOP UA

Pickup available, usually ready in 1 hour

вул. Набережно-Лугова, 29
Київ
02000
Ukraine

+380444681611

400lph Inline High Flow Fuel Pump

AEM’s 400LPH High Flow, High-Pressure Fuel Pump (AEM 50-1005) is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400LPH (100 gph) at 40 PSI, 340LPH (90 gph) at 73 PSI, and 270LPH (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the Specs tab.
 
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • Popular “044 Style” physical configuration but with AN inlet & discharge port connections
  • Maintains very high flow even at boosted fuel pressures; 340LPH @ 73 PSI (30 psi boost)
  • Installs externally or in-tank
  • Each pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI
  • Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)
  • Optional -10 ORB fitting pre-filter, -6 and -8 discharge adapters without the integral check valves

  • In the box: Fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts & boots, instructions

 

TECHNICAL SPECS:

  • Weight: 35.8oz (1015 grams)
  • Outside Diameter: 60mm OD
  • External Materials: Black plated steel with laser etching, with zamac discharge end cap
  • Inlet Fitting: -10AN 7/8"-14 Female
  • Outlet Fitting: -6AN 9/16"-18 Female
  • PRV Activation: 150 PSI
  • Impeller Design: Roller vane with ceramic end plate
 

VOLTAGE SPECS:

  • Connector Terminal: 6mm stud positive, 5mm stud negative
  • Min Voltage Input: 10 volts
  • Max Voltage Input: 18 volts
  • Current Draw (40 psi): 9.73 amps no check valve, 10.68 amps with check valve (13.5v)
  • Current Draw (120 psi): 16.07 amps no check valve, 17.13 amps with check valve (13.5v)
  • Fuse: 25 amps (13.5v)
\"\"\"\"\"\"