Delta ABS is an innovative system developed specifically for racing cars and performance tuning by SCS Delta. Thanks to flexible configuration options, the system ensures stable operation and precise slip level adjustment based on track conditions.
Why is standard ABS not suitable for motorsport?
Standard ABS systems in production vehicles are designed primarily for safety in normal road conditions. They limit braking performance to prevent loss of control on slippery surfaces. However, in motorsport, completely different settings are required:
- Excessive sensitivity to wheel lockup – standard ABS kicks in too early, preventing the wheels from partially locking up. This forces the driver to brake earlier, resulting in the loss of valuable fractions of a second on the track.
- Insufficient adaptability – the electronic system does not allow slip level adjustments for different surfaces.
- Excessive intervention – standard ABS can intervene too aggressively in the braking process, reducing efficiency at high speeds.
Motorsport ABS allows partial wheel lock and enables the driver to brake later and more aggressively – which is critical for reducing lap times.
That's why professional racers and enthusiasts install Delta ABS – the optimal ABS setup for motorsport, delivering speed, stability, and uncompromising control. Installing a motorsport ABS system allows you to adapt the braking system to any track conditions.
Why choose Delta ABS?
The anti-lock braking system (ABS) is a key performance element in motorsport. Unlike standard systems, Delta ABS is specifically designed for tuning sports cars and racing vehicles, ensuring maximum control on the track. This sports ABS system for racing cars enables effective braking even under the most demanding conditions.
Main advantages
- Individual wheel control – the system instantly reacts to wheel lock, maintaining stability.
- Adaptation to track conditions – adjusting the slip level for optimal braking.
- Integration via CAN-Bus – compatibility with ECUs, dashboards, and data acquisition systems.
This solution has already been highly rated by motorsport professionals in Ukraine and around the world.
Based on the information provided about your vehicle, the Delta ABS system can be pre-programmed and ready to use from the moment of installation.
Delivery set
Delta ABS is delivered as a complete plug-and-play kit, which includes:
- ABS control unit with integrated hydraulic module
- Pressure sensors for front and rear brakes
- Wiring kit
- Wheel speed sensors
- Angular velocity sensor (IMU)
- Slip level switch
- Optional CAN-USB interface
Easy installation and setup
The system is suitable for both vehicles equipped with factory ABS and those without. All parameters can be calibrated via CAN-USB, allowing you to easily adapt the system to any racing vehicle.
Wheel speed, slip switch position, brake pressure, and brake balance are transmitted via the open CAN bus for use by ECUs, dashboards, and data loggers. This is a key factor that affects braking performance on the track.
Important note
Delta ABS is intended for use in motorsport conditions only. The system is not certified or approved for use on public roads. The user is solely responsible for its operation.
Order Delta ABS at ATOMIC-SHOP
Ready to upgrade your car? Don’t wait — order Delta ABS at ATOMIC-SHOP today and get a system that will transform your results on the track!
