WHITELINE KCA387 комплект сайлентблоков и втулок рулевой рейки для MITSUBISHI EVO 7/8/9
Количество:
Этот товар поставляется под заказ и недоступен для немедленного самовывоза и отправки. Цена и срок поставки может отличаться. Обратите внимание, что такие товары не подлежат возврату и обмену.
Забрать можно в ATOMIC-SHOP UA
Обычно готов за час
WHITELINE KCA387 комплект сайлентблоков и втулок рулевой рейки для MITSUBISHI EVO 7/8/9
ATOMIC-SHOP UA
Возможен самовывоз, обычно готов за час
вул. Набережно-Лугова, 29
Київ
02000
Украина
Code: Z279
Warning: Please drive carefully while you accustom yourself to the changed vehicle behaviour.
Application:
Mitsubishi Lancer Evolution VII VIII
KCA387 - Steering Precision Kit is designed to improve the steering feel, precision and response while reducing
understeer and increasing front grip specifically on turn-in. This is achieved through the use of low compliance
replacement mounting bushes and special spacers to alter steering geometry.
Contents:
Each kit contains:
1 x Power steering mounting bush - passenger side
4 x Power steering mounting bush - driver side
2 x Power steering mounting bush tubes - driver side
1 x Alloy spacer plate - passenger side
2 x High tensile steel spacer discs - driver side
Fitting:
Please read the complete instructions before commencing work.
1. Whiteline recommend that all work be carried out by a qualified technician. Fitting is best done with the vehicle on a
hoist.
2. It is recommended to measure wheel alignment settings prior to fitment.
3. Remove original steering mount bushes. This will require removing or partially removing of cross-member, exhaust and
other related parts to gain access to steering rack mounts.
4. Fit new KCA387 steering rack mounting bushes.
5. During assembly of the steering rack onto the cross-member, fit spacer plate on the passenger side, and 2 spacer
discs on the drivers side, between bushes and the cross-member.
6. Reassemble steering rack, cross-member, exhaust and all other related parts.
7. Test drive the vehicle, and check tension on all fasteners.
8. Measure wheel alignment, and adjust as required.
9. Check & re-tension all fittings again after 100 kms but no more than 200 kms.