{"title":"MITSUBISHI Lancer Evolution V (1998-1999)","description":null,"products":[{"product_id":"acl-5m1219h-025-k-t-korinnykh-vkladyshiv-0-025-dlia-mitsubishi-4g63-4g63t-4g64","title":"ACL 5M1219H-.025 Main Bearing Set 0.025 for MITSUBISHI 4G63 \/ 4G63T \/ 4G64","description":"\u003cp\u003eDesigned to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 \u0026amp; 8 cylinder applications.\u003c\/p\u003e \u003ch3\u003eMain advantages\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHigh strength overlay plate with reduced thickness for improved fatigue properties.\u003c\/li\u003e \u003cli\u003eHardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.\u003c\/li\u003e \u003cli\u003eIncreased crush for improved bearing retention.\u003c\/li\u003e \u003cli\u003eElimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.\u003c\/li\u003e \u003cli\u003eIncreased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.\u003c\/li\u003e \u003cli\u003e3\/4 grooved Main Bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings.\u003c\/li\u003e \u003cli\u003eTight consistent wall tolerances to help you maintain consistent clearances.\u003c\/li\u003e \u003cli\u003eEnlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts.\u003c\/li\u003e \u003c\/ul\u003e ","brand":"ACL","offers":[{"title":"Default Title","offer_id":49109462319382,"sku":"5M1219H-.025","price":3346.31,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/77787-acl-5m1219h-025-1.jpg?v=1783505869"},{"product_id":"acl-4b1185hx-std-komplekt-shatunnykh-vkladyshiv-standartnyi-rozmir-dlia-mitsubishi-4g63-4g63t-4g64","title":"ACL 4B1185HX-STD Conrod Bearing Set, Standard Size for MITSUBISHI 4G63 \/ 4G63T \/ 4G64","description":"\u003ch2\u003eDescription\u0026nbsp;ACL 4B1185HX-STD Conrod Bearing Set, Standard Size for MITSUBISHI 4G63 \/ 4G63T \/ 4G64\u003c\/h2\u003e \u003cp\u003eACL Race Series Engine Bearings are built for high-RPM performance and suit many 4, 6, and 8-cylinder engines.\u003c\/p\u003e \u003ch3\u003eKey Features\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDurable overlay for better fatigue resistance\u003c\/li\u003e \u003cli\u003eHardened steel backs for improved support and fit\u003c\/li\u003e \u003cli\u003eTighter crush for secure placement\u003c\/li\u003e \u003cli\u003eNo flash plating for better heat transfer and grip\u003c\/li\u003e \u003cli\u003eMore eccentricity to handle bore distortion and boost oil film\u003c\/li\u003e \u003cli\u003e3\/4 grooved mains for optimal oil flow and load support\u003c\/li\u003e \u003cli\u003ePrecision wall tolerances for consistent clearances\u003c\/li\u003e \u003cli\u003eChamfered edges for high-performance crankshaft compatibility\u003c\/li\u003e \u003c\/ul\u003e ","brand":"ACL","offers":[{"title":"Default Title","offer_id":48967095779606,"sku":"4B1185HX-STD","price":2846.1,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/366299-acl-4b1185hx-std-1.jpg?v=1783513723"},{"product_id":"csf-7075b-povnorozmirnyi-tonkyi-radiator-okholodzhennia-aliuminiievyi-z-12-diuimovym-ventyliatorom-chornyi-dlia-mitsubishi-lancer-evolution-4-5-6-7-8-9-1996-2007","title":"CSF 7075B Full Size Slim All Aluminum Radiator with 12-inch SPAL Fan and Shroud (black) for MITSUBISHI Lancer Evolution 4\/5\/6\/7\/8\/9 1996-2007","description":" \u003cp\u003eCSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your Mitsubishi Evo 7\/8\/9 running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape \\\"O\\\" type radiator tube, CSF uses a specially engineered tube in the shape of a \\\"B\\\". These \\\"B-tubes\\\" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal \\\"O\\\" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With \\\"B-tubes\\\" you are able to get \\\"dual liquid laminar flow\\\". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab. \u003c\/p\u003e\u003cp\u003eThe CSF Mitsubishi Evo 7\/8\/9 radiator is a true \\\"Drop-in fit\\\" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet\/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.\u003c\/p\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2003-2006 Mitsubishi Lancer Evolution - Turbocharged 2.0L L4 (Manual)\u003c\/li\u003e\u003cli\u003e2005-2006 Mitsubishi Lancer Evolution MR - Turbocharged 2.0L L4 (Manual)\u003c\/li\u003e\u003cli\u003e2005-2006 Mitsubishi Lancer Evolution RS - Turbocharged 2.0L L4 (Manual)\u003c\/li\u003e\u003cli\u003e2006 Mitsubishi Lancer Evolution SE - Turbocharged 2.0L L4 (Manual)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOEM Part Numbers\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMitsubishi: MR464612\u003c\/li\u003e\u003c\/ul\u003e ","brand":"CSF","offers":[{"title":"Default Title","offer_id":49031688847638,"sku":"7075B","price":37899.4,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/csf-7075b.jpg?v=1780671763"},{"product_id":"cusco-lsd-141-a2-dyferentsial-pidvyshchenoho-tertia-type-mz-zadnii-2-way-dlia-mitsubishi-lancer-evolution-1994-2015-rr","title":"CUSCO LSD 141 A2 Limited slip differential Type-MZ (rear, 2 way) for MITSUBISHI Lancer Evolution 1994-2015","description":"\u003cp\u003eCuscos Type MZ Limited Slip Differential utilizes clutch discs to provide high initial torque. This is best suited for those who drift and drag race and require solid engagement. With forged internals housed in a chromoly case, this LSD is extremely durable and will serve you well in the most extreme conditions. The clutch discs in the Type MZ has radially cut grooves to allow for instant oil movement. This helps with improving durability and efficiency.\u003c\/p\u003e \u003cp\u003eEach MZ clutch disc is also polished for even and consistent contact with the pressure rings. Cusco stresses the use of wear resistant parts like their incorporation of the \u0026quot;Oil Through System\u0026quot; by using high quality chrome molybdenium steel. The internal side gears and pinion gears used are precise forged parts that enable compact yet durable gears to cope with high horsepower applications. This, in turn, increases the internal oil capacity as well as the number of MZ clutch plates taking the load off each plate for further durability.\u003c\/p\u003e \u003cp\u003eThe Cusco Oil Through System enables stability in high performance LSDs. Cuscos unique Oil Through System enables better oil flow inside the LSD for better efficiency. The casing made from Cuscos unique technology allows the oil to flow from the wide end to the pressure rings and the MZ clutch plate for efficient lubrication.\u003c\/p\u003e \u003cp\u003eMaking the LSD more stable and durable! This was only possible with Cuscos unique technology in manufacturing chrome molybdenium steel casings and gears that enabled a higher level of durability and a better flow of oil due to the large oil openings.\u003c\/p\u003e \u003cp\u003eCusco recommends the following setups for the following drivetrains:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003e1 way LSD:\u003c\/strong\u003e Specially suited for front wheel drive cars and AWD front axle cars.Activates under acceleration, and acts as a true LSD when the throttle is off.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003e1.5 way LSD:\u003c\/strong\u003e Activates under acceleration with less under-steer under deceleration than on a 2 way LSD. Recommended for those who want to reduce under-steer.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003e2 way LSD:\u003c\/strong\u003e Recommended on rear wheel drive cars and AWD rear axle cars. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.\u003c\/li\u003e \u003c\/ul\u003e","brand":"CUSCO","offers":[{"title":"Default Title","offer_id":48800839074070,"sku":"LSD 141 A2","price":48300.0,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/cusco-lsd-type-mz_cec74ba7-5d2f-4fdc-a25e-10a8ae747816.jpg?v=1753794647"},{"product_id":"cusco-lsd-141-f-dyferentsial-pidvyshchenoho-tertia-type-rs-zadnii-1-way-dlia-mitsubishi-lancer-evolution-1994-2015","title":"CUSCO LSD 141 F Limited slip differential Type-RS (rear, 1 way) for MITSUBISHI Lancer Evolution 1994-2015","description":"\u003cp\u003eA Cusco Limited Slip Differential offers the absolute best in traction. Cusco LSD allow you to choose 2 of 3 settings with each unit just with a simple overhaul. The Type RS springs absorb the initial torque. Compared to the Type MZ, the Type RS s initial torque comes on more gently. The response of the RS has lower friction and in turn, is transfers power to the ground more efficiently. The Low Initial Torque means Less Power Loss. This equates to lower lap times, even for a mildly tuned vehicle. The low pressure on the clutch plates improves durability and lowers chatter. To top it off, the reduced pressure allows the driver to change the LSD oil less frequently. Steady coil movement is assured by special precision springs set in the pressure plate. These springs are made to be resilient and allow for stable operation. Because these plates do not utilize a cone clutch, they do not stick and allow for increased longevity. The Type RS transfers extreme power without slipping and responds quickly with pedal inputs. This differential is ideal for drag racing or going for drifting. Contact Us with any questions..\u003c\/p\u003e \u003cp\u003eCusco recommends the following setups for the following drivetrains.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003e1 way LSD:\u003c\/strong\u003e Specially suited for front wheel drive cars and AWD front axle cars.Activates under acceleration, and acts as a true LSD when the throttle is off.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003e1.5 way LSD:\u003c\/strong\u003e Activates under acceleration with less under-steer under deceleration than on a 2 way LSD. Recommended for those who want to reduce under-steer.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003e2 way LSD:\u003c\/strong\u003e Recommended on rear wheel drive cars and AWD rear axle cars. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.\u003c\/li\u003e \u003c\/ul\u003e","brand":"CUSCO","offers":[{"title":"Default Title","offer_id":48800455655702,"sku":"LSD 141 F","price":48300.0,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/cusco-lsd-type-rs_f04fa3fc-e0a0-4827-9bc6-fefb2be5185d.jpg?v=1739798699"},{"product_id":"hawk-hb180f-560-halmivni-kolodky-hps-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180F.560 Brake Pads HPS Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180F.560 Brake Pads HPS Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eHawk High Performance Street (HPS) disc brake pads are known for increasing stopping power on street-legal vehicles. Upgrading the braking system with Hawk Performance Street HPS compound is straightforward and effective.\u003c\/p\u003e \u003cp\u003eThe High Performance Street compound delivers a higher coefficient of friction than stock brake pads, offering 20-40% more stopping power and greater resistance to brake fade compared to most standard replacement pads. Reduced fade results in improved pedal feel and consistent performance, while the pads remain durable and generate less dust.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigher coefficient of friction than stock pads\u003c\/li\u003e \u003cli\u003e20-40% more stopping power over standard pads\u003c\/li\u003e \u003cli\u003eGreater resistance to brake fade for consistent performance\u003c\/li\u003e \u003cli\u003eDurable pad material with reduced dust generation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: HPS\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eINFINITI G Coupe G35 Coupe 3.5 (V35) 2002-2004\u003c\/li\u003e \u003cli\u003eMASERATI Quattroporte Sedan 2.8 Twin Turbo, 3.2 Twin Turbo (AM337) 1994-2001\u003c\/li\u003e \u003cli\u003eMG ZT Sedan 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMG ZT Wagon ZT-T 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution IX FQ-360 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution VIII FQ-400 2.0 Turbo (CS) 2004-2005\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Coupe 3.5 (Z33) 2002-2009\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Roadster 3.5 (Z33) 2004-2009\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R34) 1999-2003\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R V-Spec 2.6 Twin Turbo (R32) 1992-1994\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R33) 1995-1998\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo, WRX STi Cosworth 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395258495254,"sku":"HB180F.560","price":7004.38,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/40237-hawk-hb180f-560-1_b1e07e73-1033-4fd3-963e-371c8f3ff827.jpg?v=1785862179"},{"product_id":"hawk-hb453f-585-peredni-halmivni-kolodky-hps-dlia-subaru-impreza-wrx-sti-2004-2015-mitsubishi-lancer-evo-5-10-2003-2014","title":"HAWK HB453F.585 Front Brake Pads HPS for SUBARU Impreza WRX STI 2004-2015 \/ MITSUBISHI Lancer EVO 5-10 2003-2014","description":"\u003ch2\u003eDescription HAWK HB453F.585 Front Brake Pads HPS for SUBARU Impreza WRX STI 2004-2015 \/ MITSUBISHI Lancer EVO 5-10 2003-2014\u003c\/h2\u003e \u003cp\u003eHawk High Performance Street (HPS) disc brake pads are known for increasing stopping power on street-legal vehicles. Upgrading the braking system with Hawk Performance Street HPS compound is straightforward and effective.\u003c\/p\u003e \u003cp\u003eThe High Performance Street compound delivers a higher coefficient of friction than stock brake pads, offering 20-40% more stopping power and greater resistance to brake fade compared to most standard replacement pads. Reduced fade results in improved pedal feel and consistent performance, while the pads remain durable and generate less dust.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigher coefficient of friction than stock pads\u003c\/li\u003e \u003cli\u003e20-40% more stopping power over standard pads\u003c\/li\u003e \u003cli\u003eGreater resistance to brake fade for consistent performance\u003c\/li\u003e \u003cli\u003eDurable pad material with reduced dust generation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: HPS\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCADILLAC CTS Sedan CTS-V 5.7, 6.0 2005-2007\u003c\/li\u003e \u003cli\u003eCADILLAC STS Sedan 4.6 (6 lug), STS-V 4.4 Supercharged 2005-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Camaro Coupe SS 6.2 2009-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Convertible Stingray Convertible 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Coupe Stingray 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eFORD GT Coupe 5.4 Supercharged 2004-2006\u003c\/li\u003e \u003cli\u003eFORD Mustang Convertible GT Cabriolet 5.0 (S197-II) 2010-2014\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe Shelby GT500 5.4 Supercharged (S197-I) 2006-2009\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe GT 5.0, Shelby GT500 5.4 Supercharged, 5.8 Supercharged (S197-II) 2009-2014\u003c\/li\u003e \u003cli\u003eHONDA Civic Type R 2.0 Turbo (FK2) 2015-2016\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FK8) 2017-2022\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Ralliart 2.0 Turbo (CY) 2008-2011\u003c\/li\u003e \u003cli\u003eRENAULT Megane Coupe RS 2.0 Turbo, RS Trophy 2.0 Turbo, RS Trophy R 2.0 Turbo (DZ0\/1) 2009-2018\u003c\/li\u003e \u003cli\u003eRENAULT Megane Hatchback RS 1.8 Turbo (B9A\/M) 2018-Present\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTESLA Model S Hatchback 2017-2021 (5YJS)\u003c\/li\u003e \u003cli\u003eTESLA Model X SUV 2015-2021 (5YJX)\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003cli\u003eVOLVO S60 Sedan R 2.5 Turbo (P24) 2003-2007\u003c\/li\u003e \u003cli\u003eVOLVO V70 Wagon R 2.5 Turbo (SW) 2003-2007\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FL5) 2022-Present\u003c\/li\u003e \u003cli\u003eHONDA Prelude 2.0 Turbo (BF1) 2025-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":49178550960406,"sku":"HB453F.585","price":9885.82,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/40244-hawk-hb453f-585-1_947ba81c-d766-4176-be65-e49fc6dfa4cc.jpg?v=1785862182"},{"product_id":"hawk-hb453n-585-peredni-halmivni-kolodky-hp-dlia-subaru-impreza-wrx-sti-2006-2015-toyota-gt86-gr86-mitsubishi-lancer-evo-2003-2014","title":"HAWK HB453N.585 Front Brake Pads HP+ for SUBARU Impreza WRX STI 2006-2015 \/ TOYOTA (GT86 \/ GR86) \/ MITSUBISHI Lancer EVO 2003-2014","description":"\u003ch2\u003eDescription HAWK HB453N.585 Front Brake Pads HP+ for SUBARU Impreza WRX STI 2006-2015 \/ TOYOTA (GT86 \/ GR86) \/ MITSUBISHI Lancer EVO 2003-2014\u003c\/h2\u003e \u003cp\u003eHawk High Performance Plus (HP+) disc brake pads utilize a unique ferro-carbon, high-tech friction material developed and manufactured for sport driving in autocross, Solo II, and track day applications.\u003c\/p\u003e \u003cp\u003eThe ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. These brake pads provide a noticeable increase in brake torque and temperature range compared to OEM brake pads and are usually recommended for beginners with little to no track experience looking for an upgrade over stock.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFerro-carbon, high-tech friction material\u003c\/li\u003e \u003cli\u003eDeveloped for autocross, Solo II, and track day applications\u003c\/li\u003e \u003cli\u003eLower wear rates and higher torque values than other competitive materials\u003c\/li\u003e \u003cli\u003eNoticeable increase in brake torque and temperature range compared to OEM brake pads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Sport\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: HP+\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCADILLAC CTS Sedan CTS-V 5.7, 6.0 2005-2007\u003c\/li\u003e \u003cli\u003eCADILLAC STS Sedan 4.6 (6 lug), STS-V 4.4 Supercharged 2005-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Camaro Coupe SS 6.2 2009-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Convertible Stingray Convertible 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Coupe Stingray 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eFORD GT Coupe 5.4 Supercharged 2004-2006\u003c\/li\u003e \u003cli\u003eFORD Mustang Convertible GT Cabriolet 5.0 (S197-II) 2010-2014\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe Shelby GT500 5.4 Supercharged (S197-I) 2006-2009\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe GT 5.0, Shelby GT500 5.4 Supercharged, 5.8 Supercharged (S197-II) 2009-2014\u003c\/li\u003e \u003cli\u003eHONDA Civic Type R 2.0 Turbo (FK2) 2015-2016\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FK8) 2017-2022\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Ralliart 2.0 Turbo (CY) 2008-2011\u003c\/li\u003e \u003cli\u003eRENAULT Megane Coupe RS 2.0 Turbo, RS Trophy 2.0 Turbo, RS Trophy R 2.0 Turbo (DZ0\/1) 2009-2018\u003c\/li\u003e \u003cli\u003eRENAULT Megane Hatchback RS 1.8 Turbo (B9A\/M) 2018-Present\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTESLA Model S Hatchback 2017-2021 (5YJS)\u003c\/li\u003e \u003cli\u003eTESLA Model X SUV 2015-2021 (5YJX)\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003cli\u003eVOLVO S60 Sedan R 2.5 Turbo (P24) 2003-2007\u003c\/li\u003e \u003cli\u003eVOLVO V70 Wagon R 2.5 Turbo (SW) 2003-2007\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FL5) 2022-Present\u003c\/li\u003e \u003cli\u003eHONDA Prelude 2.0 Turbo (BF1) 2025-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":49178586513686,"sku":"HB453N.585","price":11624.62,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/78164-hawk-hb453n-585-1.jpg?v=1785862180"},{"product_id":"hawk-hb453z-585-halmivni-kolodky-perf-ceramic-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453Z.585 Brake Pads Perf. Ceramic Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453Z.585 Brake Pads Perf. Ceramic Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eHawk Performance Ceramic (PC) brake pads are formulated to meet and exceed the strict low noise and ultra-low dust requirements of modern ceramic brake pad users. These pads are engineered to minimize brake noise, vibration, and harshness, providing consistent performance over extended use.\u003c\/p\u003e \u003cp\u003eThe unique compound delivers a linear friction profile, allowing the vehicle's ABS system to function optimally. Hawk PC pads are designed to reduce brake pad wear, extend rotor life, and offer a quiet braking experience.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for low noise and ultra-low dust performance\u003c\/li\u003e \u003cli\u003eLinear friction profile supports effective ABS operation\u003c\/li\u003e \u003cli\u003eReduces brake pad wear and extends rotor life\u003c\/li\u003e \u003cli\u003eEngineered for a quiet and comfortable ride\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 37-340°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 37-230°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Ceramic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: PC\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395305058582,"sku":"HB453Z.585","price":10680.7,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/86123-hawk-hb453z-585-1.jpg?v=1785858457"},{"product_id":"hawk-hb453g-585-peredni-halmivni-kolodky-dtc-60-dlia-subaru-impreza-wrx-sti-2006-2015-toyota-gt86-gr86-mitsubishi-lancer-evo-2003-2014","title":"HAWK HB453G.585 Front Brake Pads DTC-60 for SUBARU Impreza WRX STI 2006-2015 \/ TOYOTA (GT86 \/ GR86) \/ MITSUBISHI Lancer EVO 2003-2014","description":"\u003ch2\u003eDescription HAWK HB453G.585 Front Brake Pads DTC-60 for SUBARU Impreza WRX STI 2006-2015 \/ TOYOTA (GT86 \/ GR86) \/ MITSUBISHI Lancer EVO 2003-2014\u003c\/h2\u003e \u003cp\u003eHawk DTC-60 racing brake pads share the same temperature range as the DTC-70, but deliver less brake torque. Many drivers of lighter, smaller cars use DTC-60 pads on the front and DTC-30 pads on the rear. On larger, heavier, high-performance or race cars, the DTC-60 is more commonly used on the rear with the DTC-70 on the front.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 205-870°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 370-595°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: DTC-60\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":49178578583830,"sku":"HB453G.585","price":18778.54,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/228259-hawk-hb453g-585-1_4a32d0b7-935d-4f9f-bfae-6a26dec90538.jpg?v=1785858399"},{"product_id":"hawk-hb180b-560-halmivni-kolodky-hps-5-0-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180B.560 Brake Pads HPS 5.0 Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180B.560 Brake Pads HPS 5.0 Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eHigh Performance Street 5.0 pads provide strong stopping power and pedal feel without compromising ABS function. The HPS 5.0 Ferro-Carbon compound delivers advanced braking characteristics to enhance the driving experience.\u003c\/p\u003e \u003cp\u003eThis compound combines aerospace design safety and quality with motorsports braking technology. It results in shorter stopping distances, improved performance under heavy braking, and characteristics suitable for street cars.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProvides strong stopping power without compromising ABS\u003c\/li\u003e \u003cli\u003eFerro-Carbon compound for advanced braking performance\u003c\/li\u003e \u003cli\u003eCombines aerospace design with motorsports technology\u003c\/li\u003e \u003cli\u003eDelivers shorter stopping distances and improved heavy braking performance\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 37-400°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 37-290°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14,22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: HPS 5.0\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395256430870,"sku":"HB180B.560","price":7650.22,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/228591-hawk-hb180b-560-1.jpg?v=1785853552"},{"product_id":"hawk-hb453s-585-halmivni-kolodky-ht-10-15-mm-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453S.585 Brake Pads HT-10 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453S.585 Brake Pads HT-10 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eFor linear in-braking in a medium temperature range, Hawk HT-10 brake pads offer a smooth and controllable initial brake bite. They provide consistent pedal feel and improved performance. These pads deliver mild to high torque and allow for precise control of the car.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLinear in-braking performance in medium temperature range\u003c\/li\u003e \u003cli\u003eSmooth and controllable initial brake bite\u003c\/li\u003e \u003cli\u003eConsistent pedal feel\u003c\/li\u003e \u003cli\u003eMild to high torque for precise control\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 150-700°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 260-590°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: HT-10\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395313479958,"sku":"HB453S.585","price":15251.26,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/228653-hawk-hb453s-585-1.jpg?v=1785853578"},{"product_id":"hawk-hb453e-585-halmivni-kolodky-blue-9012-15-mm-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453E.585 Brake Pads Blue 9012 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453E.585 Brake Pads Blue 9012 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eHawk Blue 9012 race brake pads are designed as an entry level endurance compound, yet deliver performance beyond expectations. They are easy to bed in and provide excellent pad and rotor life. Blue 9012 race pads offer increased mid-MU characteristics and are a medium torque brake pad developed specifically for extended use in Road, Rally, and Circle Track racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEntry level endurance compound with reliable performance\u003c\/li\u003e \u003cli\u003eEasy to bed in for quick installation\u003c\/li\u003e \u003cli\u003eExcellent pad and rotor life\u003c\/li\u003e \u003cli\u003eMedium torque, increased mid-MU characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 120-540°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 175-430°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: Blue 9012\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395308859670,"sku":"HB453E.585","price":13164.7,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/228930-hawk-hb453e-585-1_e0707da3-95b4-4e21-bffb-97e4bda1fa00.jpg?v=1785858350"},{"product_id":"hawk-hb180w-560-halmivni-kolodky-dtc-30-14-mm-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180W.560 Brake Pads DTC-30 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180W.560 Brake Pads DTC-30 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eThe Hawk Dynamic Torque Control 30 (DTC-30) is a controllable torque, multi-purpose compound that has proven effective in a variety of racing series. It offers superior release characteristics, smooth pedal feel, and strong initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eControllable torque, multi-purpose compound\u003c\/li\u003e \u003cli\u003eSuperior release characteristics\u003c\/li\u003e \u003cli\u003eSmooth pedal feel and initial bite\u003c\/li\u003e \u003cli\u003eEffective in various racing applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 37-650°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 37-425°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14,22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: DTC-30\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395256135958,"sku":"HB180W.560","price":10233.58,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/229311-hawk-hb180w-560-1_8fe0f05f-523c-44b5-bf38-744390d8734d.jpg?v=1785858443"},{"product_id":"hawk-hb180g-560-halmivni-kolodky-dtc-60-14-mm-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180G.560 Brake Pads DTC-60 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180G.560 Brake Pads DTC-60 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eHawk DTC-60 racing brake pads share the same temperature range as the DTC-70, but deliver less brake torque. Many drivers of lighter, smaller cars use DTC-60 pads on the front and DTC-30 pads on the rear. On larger, heavier, high-performance or race cars, the DTC-60 is more commonly used on the rear with the DTC-70 on the front.\u003c\/p\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 205-870°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 370-595°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14,22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: DTC-60\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395256037654,"sku":"HB180G.560","price":11823.34,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/229277-hawk-hb180g-560-1.jpg?v=1785858434"},{"product_id":"hawk-hb453w-585-halmivni-kolodky-dtc-30-15-mm-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453W.585 Brake Pads DTC-30 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453W.585 Brake Pads DTC-30 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eThe Hawk Dynamic Torque Control 30 (DTC-30) is a controllable torque, multi-purpose compound that has proven effective in a variety of racing series. It offers superior release characteristics, smooth pedal feel, and strong initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eControllable torque, multi-purpose compound\u003c\/li\u003e \u003cli\u003eSuperior release characteristics\u003c\/li\u003e \u003cli\u003eSmooth pedal feel and initial bite\u003c\/li\u003e \u003cli\u003eEffective in various racing applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 37-650°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 37-425°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: DTC-30\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395305746710,"sku":"HB453W.585","price":14456.38,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/229780-hawk-hb453w-585-1_7b67ad71-6830-4957-92d3-c20061458072.jpg?v=1785852296"},{"product_id":"hawk-hb453q-585-halmivni-kolodky-dtc-80-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453Q.585 Brake Pads DTC-80 Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453Q.585 Brake Pads DTC-80 Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eHawk DTC-80 is a compound designed for use on all track and road racing venues where high torque and high temperature-resistant friction material are required. With a flat coefficient of friction at elevated temperatures, DTC-80 delivers consistent performance corner after corner.\u003c\/p\u003e \u003cp\u003eThis formulation is track tested and provides lower wear rates and higher torque values compared to many other materials. The result is improved car control, enhanced brake zone feel, and predictable performance.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigh torque and temperature-resistant friction compound\u003c\/li\u003e \u003cli\u003eConsistent performance at elevated temperatures\u003c\/li\u003e \u003cli\u003eLower wear rates and higher torque than many competitors\u003c\/li\u003e \u003cli\u003ePredictable and confident brake feel\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 260-925°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 315-815°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: DTC-80\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395309318422,"sku":"HB453Q.585","price":26727.34,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/229958-hawk-hb453q-585-1_359b4d8e-ad53-4649-bfde-e531e0a1879b.jpg?v=1785854064"},{"product_id":"hawk-hb180u-560-halmivni-kolodky-dtc-70-14-mm-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180U.560 Brake Pads DTC-70 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180U.560 Brake Pads DTC-70 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eThe Hawk DTC-70 is more aggressive than the DTC-60 while maintaining the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs, and other specialty race cars choose to run DTC-70 on the front and DTC-60 on the rear. It is a proven race solution on its own or as a split friction setup with the DTC-60.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMore aggressive than the DTC-60\u003c\/li\u003e \u003cli\u003eSame temperature range as DTC-60\u003c\/li\u003e \u003cli\u003eCommonly used as a split friction setup with DTC-60\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 205-870°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 425-650°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: DTC-70\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395259740438,"sku":"HB180U.560","price":12071.74,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230014-hawk-hb180u-560-1.jpg?v=1785854085"},{"product_id":"hawk-hb180s-560-halmivni-kolodky-ht-10-14-mm-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180S.560 Brake Pads HT-10 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180S.560 Brake Pads HT-10 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eFor linear in-braking in a medium temperature range, Hawk HT-10 brake pads offer a smooth and controllable initial brake bite. They provide consistent pedal feel and improved performance. These pads deliver mild to high torque and allow for precise control of the car.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eLinear in-braking performance in medium temperature range\u003c\/li\u003e \u003cli\u003eSmooth and controllable initial brake bite\u003c\/li\u003e \u003cli\u003eConsistent pedal feel\u003c\/li\u003e \u003cli\u003eMild to high torque for precise control\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: HT-10\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eINFINITI G Coupe G35 Coupe 3.5 (V35) 2002-2004\u003c\/li\u003e \u003cli\u003eMASERATI Quattroporte Sedan 2.8 Twin Turbo, 3.2 Twin Turbo (AM337) 1994-2001\u003c\/li\u003e \u003cli\u003eMG ZT Sedan 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMG ZT Wagon ZT-T 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution IX FQ-360 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution VIII FQ-400 2.0 Turbo (CS) 2004-2005\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Coupe 3.5 (Z33) 2002-2009\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Roadster 3.5 (Z33) 2004-2009\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R34) 1999-2003\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R V-Spec 2.6 Twin Turbo (R32) 1992-1994\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R33) 1995-1998\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo, WRX STi Cosworth 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395258757398,"sku":"HB180S.560","price":10929.1,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230164-hawk-hb180s-560-1.jpg?v=1785862009"},{"product_id":"hawk-hb453u-585-halmivni-kolodky-dtc-70-15-mm-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453U.585 Brake Pads DTC-70 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453U.585 Brake Pads DTC-70 (15 mm) Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eThe Hawk DTC-70 is more aggressive than the DTC-60 while maintaining the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs, and other specialty race cars choose to run DTC-70 on the front and DTC-60 on the rear. It is a proven race solution on its own or as a split friction setup with the DTC-60.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMore aggressive than the DTC-60\u003c\/li\u003e \u003cli\u003eSame temperature range as DTC-60\u003c\/li\u003e \u003cli\u003eCommonly used as a split friction setup with DTC-60\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: DTC-70\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCADILLAC CTS Sedan CTS-V 5.7, 6.0 2005-2007\u003c\/li\u003e \u003cli\u003eCADILLAC STS Sedan 4.6 (6 lug), STS-V 4.4 Supercharged 2005-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Camaro Coupe SS 6.2 2009-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Convertible Stingray Convertible 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Coupe Stingray 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eFORD GT Coupe 5.4 Supercharged 2004-2006\u003c\/li\u003e \u003cli\u003eFORD Mustang Convertible GT Cabriolet 5.0 (S197-II) 2010-2014\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe Shelby GT500 5.4 Supercharged (S197-I) 2006-2009\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe GT 5.0, Shelby GT500 5.4 Supercharged, 5.8 Supercharged (S197-II) 2009-2014\u003c\/li\u003e \u003cli\u003eHONDA Civic Type R 2.0 Turbo (FK2) 2015-2016\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FK8) 2017-2022\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Ralliart 2.0 Turbo (CY) 2008-2011\u003c\/li\u003e \u003cli\u003eRENAULT Megane Coupe RS 2.0 Turbo, RS Trophy 2.0 Turbo, RS Trophy R 2.0 Turbo (DZ0\/1) 2009-2018\u003c\/li\u003e \u003cli\u003eRENAULT Megane Hatchback RS 1.8 Turbo (B9A\/M) 2018-Present\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTESLA Model S Hatchback 2017-2021 (5YJS)\u003c\/li\u003e \u003cli\u003eTESLA Model X SUV 2015-2021 (5YJX)\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003cli\u003eVOLVO S60 Sedan R 2.5 Turbo (P24) 2003-2007\u003c\/li\u003e \u003cli\u003eVOLVO V70 Wagon R 2.5 Turbo (SW) 2003-2007\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FL5) 2022-Present\u003c\/li\u003e \u003cli\u003eHONDA Prelude 2.0 Turbo (BF1) 2025-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395311218966,"sku":"HB453U.585","price":20517.34,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230340-hawk-hb453u-585-1.jpg?v=1785862061"},{"product_id":"hawk-hb180e-560-halmivni-kolodky-blue-9012-14-mm-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180E.560 Brake Pads Blue 9012 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180E.560 Brake Pads Blue 9012 (14 mm) Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eHawk Blue 9012 race brake pads are designed as an entry level endurance compound, yet deliver performance beyond expectations. They are easy to bed in and provide excellent pad and rotor life. Blue 9012 race pads offer increased mid-MU characteristics and are a medium torque brake pad developed specifically for extended use in Road, Rally, and Circle Track racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEntry level endurance compound with reliable performance\u003c\/li\u003e \u003cli\u003eEasy to bed in for quick installation\u003c\/li\u003e \u003cli\u003eExcellent pad and rotor life\u003c\/li\u003e \u003cli\u003eMedium torque, increased mid-MU characteristics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 120-540°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 175-430°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: Blue 9012\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395255742742,"sku":"HB180E.560","price":8743.18,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230457-hawk-hb180e-560-1.jpg?v=1785854100"},{"product_id":"hawk-hb180z-560-halmivni-kolodky-perf-ceramic-zadni-dlia-subaru-sti-mitsubishi-evo-5-9-ap-racing-cp5119-cp6120-cp6121","title":"HAWK HB180Z.560 Brake Pads Perf. Ceramic Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121","description":"\u003ch2\u003eDescription HAWK HB180Z.560 Brake Pads Perf. Ceramic Rear SUBARU STI\/MITSUBISHI EVO 5-9\/AP Racing CP5119\/CP6120\/CP6121\u003c\/h2\u003e \u003cp\u003eHawk Performance Ceramic (PC) brake pads are formulated to meet and exceed the strict low noise and ultra-low dust requirements of modern ceramic brake pad users. These pads are engineered to minimize brake noise, vibration, and harshness, providing consistent performance over extended use.\u003c\/p\u003e \u003cp\u003eThe unique compound delivers a linear friction profile, allowing the vehicle's ABS system to function optimally. Hawk PC pads are designed to reduce brake pad wear, extend rotor life, and offer a quiet braking experience.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned for low noise and ultra-low dust performance\u003c\/li\u003e \u003cli\u003eLinear friction profile supports effective ABS operation\u003c\/li\u003e \u003cli\u003eReduces brake pad wear and extends rotor life\u003c\/li\u003e \u003cli\u003eEngineered for a quiet and comfortable ride\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 37-340°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 37-230°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Ceramic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14,22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: PC\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395257053462,"sku":"HB180Z.560","price":7749.58,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230478-hawk-hb180z-560-1_980e1da2-e60d-4183-bfab-51e918ea8e71.jpg?v=1785854109"},{"product_id":"hawk-hb453b-585-halmivni-kolodky-hps-5-0-peredni-dlia-subaru-impreza-sti-mitsubishi-evo-4-x","title":"HAWK HB453B.585 Brake Pads HPS 5.0 Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X","description":"\u003ch2\u003eDescription HAWK HB453B.585 Brake Pads HPS 5.0 Front SUBARU Impreza STI\/MITSUBISHI EVO 4-X\u003c\/h2\u003e \u003cp\u003eHigh Performance Street 5.0 pads provide strong stopping power and pedal feel without compromising ABS function. The HPS 5.0 Ferro-Carbon compound delivers advanced braking characteristics to enhance the driving experience.\u003c\/p\u003e \u003cp\u003eThis compound combines aerospace design safety and quality with motorsports braking technology. It results in shorter stopping distances, improved performance under heavy braking, and characteristics suitable for street cars.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eProvides strong stopping power without compromising ABS\u003c\/li\u003e \u003cli\u003eFerro-Carbon compound for advanced braking performance\u003c\/li\u003e \u003cli\u003eCombines aerospace design with motorsports technology\u003c\/li\u003e \u003cli\u003eDelivers shorter stopping distances and improved heavy braking performance\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Street\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14,86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: HPS 5.0\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCADILLAC CTS Sedan CTS-V 5.7, 6.0 2005-2007\u003c\/li\u003e \u003cli\u003eCADILLAC STS Sedan 4.6 (6 lug), STS-V 4.4 Supercharged 2005-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Camaro Coupe SS 6.2 2009-2010\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Convertible Stingray Convertible 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eCHEVROLET Corvette Coupe Stingray 6.2 (C8) 2020-Present\u003c\/li\u003e \u003cli\u003eFORD GT Coupe 5.4 Supercharged 2004-2006\u003c\/li\u003e \u003cli\u003eFORD Mustang Convertible GT Cabriolet 5.0 (S197-II) 2010-2014\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe Shelby GT500 5.4 Supercharged (S197-I) 2006-2009\u003c\/li\u003e \u003cli\u003eFORD Mustang Coupe GT 5.0, Shelby GT500 5.4 Supercharged, 5.8 Supercharged (S197-II) 2009-2014\u003c\/li\u003e \u003cli\u003eHONDA Civic Type R 2.0 Turbo (FK2) 2015-2016\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FK8) 2017-2022\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution X 2.0 Turbo (CZ4A) 2008-2016\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Ralliart 2.0 Turbo (CY) 2008-2011\u003c\/li\u003e \u003cli\u003eRENAULT Megane Coupe RS 2.0 Turbo, RS Trophy 2.0 Turbo, RS Trophy R 2.0 Turbo (DZ0\/1) 2009-2018\u003c\/li\u003e \u003cli\u003eRENAULT Megane Hatchback RS 1.8 Turbo (B9A\/M) 2018-Present\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTESLA Model S Hatchback 2017-2021 (5YJS)\u003c\/li\u003e \u003cli\u003eTESLA Model X SUV 2015-2021 (5YJX)\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003cli\u003eVOLVO S60 Sedan R 2.5 Turbo (P24) 2003-2007\u003c\/li\u003e \u003cli\u003eVOLVO V70 Wagon R 2.5 Turbo (SW) 2003-2007\u003c\/li\u003e \u003cli\u003eHONDA Civic Type-R 2.0 Turbo (FL5) 2022-Present\u003c\/li\u003e \u003cli\u003eHONDA Prelude 2.0 Turbo (BF1) 2025-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395309547798,"sku":"HB453B.585","price":10382.62,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/230777-hawk-hb453b-585-1_4b8d48ce-fbb0-4bc5-9768-767a81d16b16.jpg?v=1785862017"},{"product_id":"hawk-hb180d-560-peredni-halmivni-kolodky-er-1-endurance-racing-dlia-lotus-elise-2001-2011","title":"HAWK HB180D.560 Front Brake Pads ER-1 Endurance Racing for LOTUS Elise 2001-2011","description":"\u003ch2\u003eDescription HAWK HB180D.560 Front Brake Pads ER-1 Endurance Racing for LOTUS Elise 2001-2011\u003c\/h2\u003e \u003cp\u003eThe ER-1 compound was developed by Hawk Performance for the endurance racing market with the goal of providing a higher coefficient of friction than competing endurance pads while maintaining equal or improved lifespan. Extensive testing at major races across America has resulted in a compound that delivers ideal modulation and pedal feedback, with exceptional friction stability throughout the thermal range.\u003c\/p\u003e \u003cp\u003eThis consistent performance over long periods makes the ER-1 suitable for endurance racing, track days, time trials, and sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads\u003c\/li\u003e \u003cli\u003eConsistent friction stability across the thermal range\u003c\/li\u003e \u003cli\u003eIdeal for endurance racing, track days, and time trials\u003c\/li\u003e \u003cli\u003eProvides excellent pedal communication and modulation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D961-7859\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003eFits on Caliper: ST-22 Sport, STR-22 Sport, STR-22 Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.22\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 67\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 77\u003c\/li\u003e \u003cli\u003ePad Label: ER-1\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFitments:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eINFINITI G Coupe G35 Coupe 3.5 (V35) 2002-2004\u003c\/li\u003e \u003cli\u003eMASERATI Quattroporte Sedan 2.8 Twin Turbo, 3.2 Twin Turbo (AM337) 1994-2001\u003c\/li\u003e \u003cli\u003eMG ZT Sedan 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMG ZT Wagon ZT-T 260 4.6 2004-2005\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution V GSR 2.0 Turbo, Evolution VI 2.0 Turbo (15\\\" Wheels), 2.0 Turbo, Evolution VII 2.0 Turbo (CJ) 1998-2003\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Evolution IX 2.0 Turbo, Evolution IX FQ-360 2.0 Turbo, Evolution VIII 2.0 Turbo (CT9A) 2004-2008\u003c\/li\u003e \u003cli\u003eMITSUBISHI Lancer Sedan Evolution VIII FQ-400 2.0 Turbo (CS) 2004-2005\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Coupe 3.5 (Z33) 2002-2009\u003c\/li\u003e \u003cli\u003eNISSAN 350Z Roadster 3.5 (Z33) 2004-2009\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R34) 1999-2003\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R V-Spec 2.6 Twin Turbo (R32) 1992-1994\u003c\/li\u003e \u003cli\u003eNISSAN Skyline Coupe GT-R 2.6 Twin Turbo (R33) 1995-1998\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/A) 2000-2002\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.0 Turbo (GD\/B-E) 2002-2005\u003c\/li\u003e \u003cli\u003eSUBARU Impreza RB320 2.5 Turbo (GDBG4EH) 2006-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Sedan WRX STi 2.5 Turbo (GD\/F-G) 2005-2007\u003c\/li\u003e \u003cli\u003eSUBARU Impreza Hatchback WRX STi 2.5 Turbo, WRX STi Cosworth 2.5 Turbo (GH) 2007-2012\u003c\/li\u003e \u003cli\u003eSUBARU WRX Sedan STi 2.5 Turbo (VA) 2014-2016\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe 2.0 (ZN6) 2012-2020\u003c\/li\u003e \u003cli\u003eTOYOTA GT86 Coupe GR86 2.4 (ZN8) 2021-Present\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395256987926,"sku":"HB180D.560","price":11873.02,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/641760-hawk-hb180d-560-1.jpg?v=1785854245"},{"product_id":"hawk-hb453d-585-peredni-halmivni-kolodky-er-1-endurance-racing-dlia-subaru-impreza-wrx-2004-2015-mitsubishi-lancer-evolution-2003-2014","title":"HAWK HB453D.585 Front Brake Pads ER-1 Endurance Racing for SUBARU Impreza WRX 2004-2015\/ MITSUBISHI Lancer Evolution 2003-2014","description":"\u003ch2\u003eDescription HAWK HB453D.585 Front Brake Pads ER-1 Endurance Racing for SUBARU Impreza WRX 2004-2015\/ MITSUBISHI Lancer Evolution 2003-2014\u003c\/h2\u003e \u003cp\u003eThe ER-1 compound was developed by Hawk Performance for the endurance racing market with the goal of providing a higher coefficient of friction than competing endurance pads while maintaining equal or improved lifespan. Extensive testing at major races across America has resulted in a compound that delivers ideal modulation and pedal feedback, with exceptional friction stability throughout the thermal range.\u003c\/p\u003e \u003cp\u003eThis consistent performance over long periods makes the ER-1 suitable for endurance racing, track days, time trials, and sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads\u003c\/li\u003e \u003cli\u003eConsistent friction stability across the thermal range\u003c\/li\u003e \u003cli\u003eIdeal for endurance racing, track days, and time trials\u003c\/li\u003e \u003cli\u003eProvides excellent pedal communication and modulation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOperating temperatures: 200-870°C\u003c\/li\u003e \u003cli\u003eOptimal temperature range: 370-590°C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrake Pads Compound: Semi-Metallic\u003c\/li\u003e \u003cli\u003eFMSI Number: D1001-7902\u003c\/li\u003e \u003cli\u003eBrake Pads Type: Race\u003c\/li\u003e \u003cli\u003ePackage Contents: 1 set of pads for two calipers\u003c\/li\u003e \u003cli\u003eInner Pad Thickness (mm): 14.86\u003c\/li\u003e \u003cli\u003eInner Pad Height (mm): 77\u003c\/li\u003e \u003cli\u003eInner Pad Width (mm): 132\u003c\/li\u003e \u003cli\u003ePad Label: ER-1\u003c\/li\u003e \u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":48395315118358,"sku":"HB453D.585","price":19523.74,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/641803-hawk-hb453d-585-1.jpg?v=1785854221"},{"product_id":"hks-1419-rm001-vypusknyi-kolektor-dlia-mitsubishi-evo-4-5-6-7-8-9","title":"HKS 1419-RM001 SS Exhaust Manifold Mitsubishi Lancer EVO 4\/5\/6\/7\/8\/9","description":"\u003cp\u003eThe best solution to reduce primary exhaust gas pressure and supply smooth exhaust gas to turbine is replacement of\u003c\/p\u003e ","brand":"HKS","offers":[{"title":"Default Title","offer_id":49292835324182,"sku":"1419-RM001","price":124725.6,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/3535_kmzo_mani_img_02.jpg?v=1771233082"},{"product_id":"ferodo-fcp1562r-zadni-halmivni-kolodky-ds3000-dlia-subaru-wrx-sti-gr-mitsubishi-evo-9-nissan-350z-z33","title":"FERODO FCP1562R Rear Brake Pads DS3000 for SUBARU WRX STI (GG\/GD \/ GR\/GV) \/ MITSUBISHI EVO 5-9 \/ NISSAN 350Z ","description":"\u003ch2\u003eDescription FERODO FCP1562R Rear Brake Pads DS3000 for SUBARU WRX STI (GR) \/ MITSUBISHI EVO 9 \/ NISSAN 350Z (Z33)\u003c\/h2\u003e\u003cp\u003eFerodo DS3000 brake pads are designed for high-performance motorsport use, offering a heavy-duty all-round friction material. They deliver consistent performance with a short bedding time, making them suitable for touring car, rally, Group N, single-seater, and hill-climb applications.\u003c\/p\u003e\u003cul\u003e \u003cli\u003eHeavy-duty all-round compound for motorsport use\u003c\/li\u003e \u003cli\u003eShort bedding-in time\u003c\/li\u003e \u003cli\u003eApplications include touring car, rally, Group N, single seat, hill-climb\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cul\u003e \u003cli\u003eAverage Friction Coefficient: 0.48\u003c\/li\u003e \u003cli\u003eOperating Temperature Range: 200 –650 C\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eWarning: DS3000 is not suitable for road use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFamily shape:\u003c\/strong\u003e FCP1562\u003c\/p\u003e","brand":"FERODO Racing","offers":[{"title":"Default Title","offer_id":49222162907414,"sku":"FCP1562R","price":7263.25,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/ferodo-fcp1562r.jpg?v=1774619128"},{"product_id":"pagid-1587-rsl29-zadni-halmivni-kolodky-dlia-subaru-sti-03-16-mitsubishi-evo-5-9-nissan-350z-ap-racing-cp5119-d50","title":"PAGID 1587-RSL29 Rear brake pads RSL29 for HYUNDAI Genesis Coupe 3.8 track \/ AP Racing CP5119 D50 \/ StopTech ST24","description":"\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eRSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and aramid fibers. The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eApplication range:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eVery popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.\u003c\/p\u003e \u003cp\u003e\u003cimg alt=\\\"\\\" src=\\\"https:\/\/cdn.atomic-shop.com\/images\/product\/273\/273225\/RSL.png\\\" style=\\\"height:296px; width:960px\\\" \/\u003e\u003c\/p\u003e \u003cp\u003e\u0026nbsp;\u003c\/p\u003e ","brand":"PAGID","offers":[{"title":"Default Title","offer_id":49231539110166,"sku":"1587-RSL29","price":9106.23,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/PAGID_20E1587-RSL29_20_281_29.png?v=1774970084"},{"product_id":"pfc-7781-01-15-44-peredni-halmivni-kolodky-dlia-renault-megane-3-rs-honda-civic-type-r-fk2-fk8-mitsubishi-evo-4-x-subaru-sti-01-kompaund-15-mm","title":"PFC 7781.01.15.44 Front brake pads 01 CMPD 15mm SUBARU STI \/ MITSUBISHI EVO","description":"\u003cp\u003e\u003cstrong\u003eFor Brembo caliper\u003c\/strong\u003e\u003cbr\u003ePad profiles 7781 (rally \/ race) \u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDimensions 132 × 15 × 61 mm\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003ePad compound 01 (sprint), 08 (endurance), 331 (ABS-friendly), Z-rated (fast road \/ track day)\u003cbr\u003ePad thickness 15mm \u003c\/p\u003e\u003cp\u003eHome \/ Brake pads \/ 1001\u003cbr\u003eAlfa Romeo \/ Aston Martin \/ Audi \/ Cadillac \/ Chevrolet \/ Citroen \/ Ferrari \/ Ford \/ Honda \/ Hyundai \/ Maserati \/ Mitsubishi \/ Range Rover \/ Renault \/ Seat \/ Subaru \/ Tesla \/ Vauxhall \/ Volvo \/ VW \u003c\/p\u003e\u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplication Information\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eAlfa Romeo 147 GTA 3.2 litre 2003- 147GTA\u003cbr\u003eAlfa Romeo 156 GTA 3.2 litre 2003- 156GTA\u003cbr\u003eAlfa Romeo 159 2.4 \/ 3.2 litre 2005-11\u003cbr\u003eAlfa Romeo 166 24V 2.5 \/ 3.0 litre 1998-00\u003cbr\u003eAlfa Romeo 166 24V 3.2 litre 2003-07\u003cbr\u003eAlfa Romeo 166 JTD 2.4 litre 2003-\u003cbr\u003eAlfa Romeo 166 V6 2.0 litre 1998-\u003cbr\u003eAlfa Romeo Brera 1.8 Turbo \/ 2.4 20V 2005-\u003cbr\u003eAlfa Romeo Brera 3.2 V6 2006-\u003cbr\u003eAlfa Romeo Giulietta 1.4T \/ 2.0 JTDM 2010-\u003cbr\u003eAlfa Romeo GT 3.2 GTA 2003- GT-3.2\u003cbr\u003eAston Martin DB9 5.9 2004-16 V12\u003cbr\u003eAston Martin DB11 V8 \/ V12 2016- Rear\u003cbr\u003eAston Martin Vantage 4.3 2007- N24 V8\u003cbr\u003eAston Martin Vantage 4.3 \u0026amp; 4.7 2005-17 V8\u003cbr\u003eAston Martin Vantage 4.0 V8 2018- Rear\u003cbr\u003eAudi RS3 Quattro 2011-14\u003cbr\u003eAudi TT RS Quattro 2.5 TFSI 2009-14\u003cbr\u003eCadillac CT6 \/ CTS Performance models 2015-\u003cbr\u003eChevrolet Camaro Coupé 1SS\/2SS 2010- 16mm\u003cbr\u003eChevrolet Camaro Coupé LT1 6.2 litre 2016- 16mm\u003cbr\u003eChevrolet Corvette C7 Stingray J55 2013- 16mm\u003cbr\u003eCitroen C2 R2 C2-R2 1.6 16V (Tarmac) 2009- 16mm\u003cbr\u003eCitroen C2 Sport 1.6 16V 2003-\u003cbr\u003eDodge Viper SRT 2014-\u003cbr\u003eFerrari 458 Challenge race rear\u003cbr\u003eFerrari 612 5.7 litre 2004-\u003cbr\u003eFord Mustang Boss 2012-13\u003cbr\u003eFord Mustang GT500 inc Shelby 2007-12\u003cbr\u003eFord Mustang GT500 Brembo caliper 2013-\u003cbr\u003eHonda Civic Type-R FK2 2.0i 2015- IX\u003cbr\u003eHonda Civic Type-R FK8 2.0i 2017- X\u003cbr\u003eHyundai Genesis Coupé 3.8 litre 2004- Race\u003cbr\u003eKia Stinger 3.3 litre V6 2018-\u003cbr\u003eLancia Kappa 3.0 litre 24V 1998-01\u003cbr\u003eMaserati Ghibli 3.0 litre 2013- 16mm\u003cbr\u003eMaserati Quattroporte 4.2 litre 2004- 16mm\u003cbr\u003eMitsubishi Evo 5-9 1996-08 VIII IX\u003cbr\u003eMitsubishi Evo X Ten 2008-\u003cbr\u003eRange Rover III Supercharged 4.2 inc Sport 2005-\u003cbr\u003eRenault Mégane 3 2.0 RS 250, 265 \u0026amp; 275 2008-\u003cbr\u003eRenault Mégane 4 1.8 RS 2018-\u003cbr\u003eSeat Leon Cupra 2.0 2015-\u003cbr\u003eSubaru Impreza GDB \/ GDF 2001- WRX Sti\u003cbr\u003eSubaru Impreza WRX STi 2001- inc Gp N\u003cbr\u003eTesla Model S 60\/70\/75\/85\/90\/100 2012-\u003cbr\u003eTesla Model X P100D 2016-\u003cbr\u003eVauxhall Astra 1.6 \/ 2.0 inc GTC 2012-\u003cbr\u003eVauxhall Insignia VXR\u003cbr\u003eVolkswagen Touareg 3.0 litre 2004- V6 TDi\u003cbr\u003eVolkswagen Touareg 3.2 litre 2002- V6 TDi\u003cbr\u003eVolkswagen Touareg 3.6 litre 2006- V6 FSI\u003cbr\u003eVolvo S60 2.5 litre 4WD 2003- Turbo R\u003cbr\u003eVolvo S70 \/ V70 2.5 litre 4WD 2003- Turbo R \u003c\/p\u003e\u003cp\u003eOpel 2004-07 RS3-Quattro TTRS VW RS250 RS265 RS 265 RS275 R3 III RS Megane-3 Megane-4 Trophy Coupe 8j0698151k\u003c\/p\u003e","brand":"PFC Brakes","offers":[{"title":"Default Title","offer_id":49176635048214,"sku":"7781.01.15.44","price":22960.24,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/2480_T0Cm_10011.png?v=1785768616"},{"product_id":"pfc-319-044-64-perednii-pravyihalmivnyi-dysk-v3-319x32-mm-dlia-mitsubishi-lancer-evo-7-8-9","title":"PFC 318.067.64 Front Right Brake Disc V3 319x32 mm for MITSUBISHI Lancer EVO 5 \/ 6 \/ 7 \/ 8 \/ 9","description":"\u003ch2\u003eDescription\u0026nbsp;PFC 318.067.64 Front Right\u0026nbsp;Brake Disc V3 319x32 mm for MITSUBISHI Lancer EVO 7 \/ 8 \/ 9\u003c\/h2\u003e \u003cp\u003ePFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.\u003c\/p\u003e \u003cp\u003eThe ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.\u003c\/p\u003e \u003cp\u003eThis V3 disc retention method is based on the use of a two- or three-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced mass on disc connecting flanges, which reduces thermal distortion (more specifically, coning) at race temperatures. Reduced coning allows the pads to sit flatter on the disc, which better utilizes the available radial depth. There is better pad force distribution and the brakes will run cooler, reducing hot spots on the disc. This will also have the benefit of reduced taper wear of the pads.\u003c\/li\u003e \u003cli\u003eMore heat will be contained in the brake faces because there is less of a heat sink in the flanges. This reduces thermal stress at the ID of the disc and reduces the chance of thermal cracking to occur.\u003c\/li\u003e \u003cli\u003eConsistent disc float from race beginning to end. As a race progresses with a bobbin disc, float will often be reduced when a bobbin is no longer sitting square in the disc. Reduced float will increase piston knockback, increase pedal travel and add vibration.\u003c\/li\u003e \u003cli\u003eReduced complexity. The number of brake assembly parts is reduced from 38+ for a bobbin drive disc to just 3 in a V3 disc assembly\u003c\/li\u003e \u003cli\u003eDecreased assembly time. You can assemble a V3 race disc in a matter of seconds.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDisc Diameter: 319 mm\u003c\/li\u003e \u003cli\u003eDisc Thickness: 32 mm\u003c\/li\u003e \u003cli\u003eMounting Type: V3\u003c\/li\u003e \u003cli\u003ePosition:\u0026nbsp;Front Right\u003c\/li\u003e \u003c\/ul\u003e ","brand":"PFC Brakes","offers":[{"title":"Default Title","offer_id":49176677679382,"sku":"319.044.64","price":36184.58,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/pfc-brake-disc_1.jpg?v=1785768629"},{"product_id":"pfc-7781-08-15-44-peredni-halmivni-kolodky-dlia-renault-megane-3-rs-honda-civic-type-r-fk2-fk8-mitsubishi-evo-4-x-subaru-sti-08-kompaund-15-mm","title":"PFC 7781.08.15.44 Front brake pads 08 CMPD 15mm SUBARU STI \/ MITSUBISHI EVO","description":"\u003cp\u003e\u003cstrong\u003eFor Brembo caliper\u003c\/strong\u003e\u003cbr \/\u003e Pad profiles 7781 (rally \/ race)\u003c\/p\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eDimensions 132 × 15 × 61 mm\u003c\/strong\u003e\u003c\/em\u003e\u003cbr \/\u003e Pad compound 01 (sprint), 08 (endurance), 331 (ABS-friendly), Z-rated (fast road \/ track day)\u003cbr \/\u003e Pad thickness 15mm\u003c\/p\u003e \u003cp\u003eHome \/ Brake pads \/ 1001\u003cbr \/\u003e Alfa Romeo \/ Aston Martin \/ Audi \/ Cadillac \/ Chevrolet \/ Citroen \/ Ferrari \/ Ford \/ Honda \/ Hyundai \/ Maserati \/ Mitsubishi \/ Range Rover \/ Renault \/ Seat \/ Subaru \/ Tesla \/ Vauxhall \/ Volvo \/ VW\u003c\/p\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eApplication Information\u003c\/strong\u003e\u003c\/em\u003e\u003cbr \/\u003e Alfa Romeo 147 GTA 3.2 litre 2003- 147GTA\u003cbr \/\u003e Alfa Romeo 156 GTA 3.2 litre 2003- 156GTA\u003cbr \/\u003e Alfa Romeo 159 2.4 \/ 3.2 litre 2005-11\u003cbr \/\u003e Alfa Romeo 166 24V 2.5 \/ 3.0 litre 1998-00\u003cbr \/\u003e Alfa Romeo 166 24V 3.2 litre 2003-07\u003cbr \/\u003e Alfa Romeo 166 JTD 2.4 litre 2003-\u003cbr \/\u003e Alfa Romeo 166 V6 2.0 litre 1998-\u003cbr \/\u003e Alfa Romeo Brera 1.8 Turbo \/ 2.4 20V 2005-\u003cbr \/\u003e Alfa Romeo Brera 3.2 V6 2006-\u003cbr \/\u003e Alfa Romeo Giulietta 1.4T \/ 2.0 JTDM 2010-\u003cbr \/\u003e Alfa Romeo GT 3.2 GTA 2003- GT-3.2\u003cbr \/\u003e Aston Martin DB9 5.9 2004-16 V12\u003cbr \/\u003e Aston Martin DB11 V8 \/ V12 2016- Rear\u003cbr \/\u003e Aston Martin Vantage 4.3 2007- N24 V8\u003cbr \/\u003e Aston Martin Vantage 4.3 \u0026amp; 4.7 2005-17 V8\u003cbr \/\u003e Aston Martin Vantage 4.0 V8 2018- Rear\u003cbr \/\u003e Audi RS3 Quattro 2011-14\u003cbr \/\u003e Audi TT RS Quattro 2.5 TFSI 2009-14\u003cbr \/\u003e Cadillac CT6 \/ CTS Performance models 2015-\u003cbr \/\u003e Chevrolet Camaro Coupé 1SS\/2SS 2010- 16mm\u003cbr \/\u003e Chevrolet Camaro Coupé LT1 6.2 litre 2016- 16mm\u003cbr \/\u003e Chevrolet Corvette C7 Stingray J55 2013- 16mm\u003cbr \/\u003e Citroen C2 R2 C2-R2 1.6 16V (Tarmac) 2009- 16mm\u003cbr \/\u003e Citroen C2 Sport 1.6 16V 2003-\u003cbr \/\u003e Dodge Viper SRT 2014-\u003cbr \/\u003e Ferrari 458 Challenge race rear\u003cbr \/\u003e Ferrari 612 5.7 litre 2004-\u003cbr \/\u003e Ford Mustang Boss 2012-13\u003cbr \/\u003e Ford Mustang GT500 inc Shelby 2007-12\u003cbr \/\u003e Ford Mustang GT500 Brembo caliper 2013-\u003cbr \/\u003e Honda Civic Type-R FK2 2.0i 2015- IX\u003cbr \/\u003e Honda Civic Type-R FK8 2.0i 2017- X\u003cbr \/\u003e Hyundai Genesis Coupé 3.8 litre 2004- Race\u003cbr \/\u003e Kia Stinger 3.3 litre V6 2018-\u003cbr \/\u003e Lancia Kappa 3.0 litre 24V 1998-01\u003cbr \/\u003e Maserati Ghibli 3.0 litre 2013- 16mm\u003cbr \/\u003e Maserati Quattroporte 4.2 litre 2004- 16mm\u003cbr \/\u003e Mitsubishi Evo 5-9 1996-08 VIII IX\u003cbr \/\u003e Mitsubishi Evo X Ten 2008-\u003cbr \/\u003e Range Rover III Supercharged 4.2 inc Sport 2005-\u003cbr \/\u003e Renault Mégane 3 2.0 RS 250, 265 \u0026amp; 275 2008-\u003cbr \/\u003e Renault Mégane 4 1.8 RS 2018-\u003cbr \/\u003e Seat Leon Cupra 2.0 2015-\u003cbr \/\u003e Subaru Impreza GDB \/ GDF 2001- WRX Sti\u003cbr \/\u003e Subaru Impreza WRX STi 2001- inc Gp N\u003cbr \/\u003e Tesla Model S 60\/70\/75\/85\/90\/100 2012-\u003cbr \/\u003e Tesla Model X P100D 2016-\u003cbr \/\u003e Vauxhall Astra 1.6 \/ 2.0 inc GTC 2012-\u003cbr \/\u003e Vauxhall Insignia VXR\u003cbr \/\u003e Volkswagen Touareg 3.0 litre 2004- V6 TDi\u003cbr \/\u003e Volkswagen Touareg 3.2 litre 2002- V6 TDi\u003cbr \/\u003e Volkswagen Touareg 3.6 litre 2006- V6 FSI\u003cbr \/\u003e Volvo S60 2.5 litre 4WD 2003- Turbo R\u003cbr \/\u003e Volvo S70 \/ V70 2.5 litre 4WD 2003- Turbo R\u003c\/p\u003e \u003cp\u003eOpel 2004-07 RS3-Quattro TTRS VW RS250 RS265 RS 265 RS275 R3 III RS Megane-3 Megane-4 Trophy Coupe 8j0698151k\u003c\/p\u003e \u003cp\u003e\u0026nbsp;\u003c\/p\u003e \u003cp\u003e\u003cimg alt=\\\"\\\" src=\\\"https:\/\/d3pd3d30e33rxi.cloudfront.net\/product_data\/products\/000test\/Igor%20Bydzan\/PFC.jpg\\\" style=\\\"height:1000px; width:1149px\\\" \/\u003e\u003c\/p\u003e \u003cp\u003e\u0026nbsp;\u003c\/p\u003e \u003cp\u003e\u003ca data-tabindex-counter=\\\"1\\\" data-tabindex-value=\\\"none\\\" href=\\\"https:\/\/pfcbrakes.com\/wp-content\/uploads\/2021\/07\/20210719_AMK_Part-Number-Key.pdf\\\" tabindex=\\\"-1\\\"\u003ePFC PART NUMBER KEY\u003c\/a\u003e​​​​​​\u003c\/p\u003e ","brand":"PFC Brakes","offers":[{"title":"Default Title","offer_id":49176561582358,"sku":"7781.08.15.44","price":28645.44,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/140551_f2Ib_10011.png?v=1785768629"},{"product_id":"pfc-319-044-63-perednii-livyi-halmivnyi-dysk-v3-319x32-mm-dlia-mitsubishi-lancer-evo-7-8-9","title":"PFC 319.044.63 Front Left Brake Disc V3 319x32 mm for MITSUBISHI Lancer EVO 5 \/ 6 \/ 7 \/ 8 \/ 9","description":"\u003ch2\u003eDescription\u0026nbsp;PFC 318.067.63 Front Left\u0026nbsp;Brake Disc V3 319x32 mm for MITSUBISHI Lancer EVO 7 \/ 8 \/ 9\u003c\/h2\u003e \u003cp\u003ePFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.\u003c\/p\u003e \u003cp\u003eThe ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.\u003c\/p\u003e \u003cp\u003eThis V3 disc retention method is based on the use of a two- or three-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduced mass on disc connecting flanges, which reduces thermal distortion (more specifically, coning) at race temperatures. Reduced coning allows the pads to sit flatter on the disc, which better utilizes the available radial depth. There is better pad force distribution and the brakes will run cooler, reducing hot spots on the disc. This will also have the benefit of reduced taper wear of the pads.\u003c\/li\u003e \u003cli\u003eMore heat will be contained in the brake faces because there is less of a heat sink in the flanges. This reduces thermal stress at the ID of the disc and reduces the chance of thermal cracking to occur.\u003c\/li\u003e \u003cli\u003eConsistent disc float from race beginning to end. As a race progresses with a bobbin disc, float will often be reduced when a bobbin is no longer sitting square in the disc. Reduced float will increase piston knockback, increase pedal travel and add vibration.\u003c\/li\u003e \u003cli\u003eReduced complexity. The number of brake assembly parts is reduced from 38+ for a bobbin drive disc to just 3 in a V3 disc assembly\u003c\/li\u003e \u003cli\u003eDecreased assembly time. You can assemble a V3 race disc in a matter of seconds.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSpecifications:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDisc Diameter: 319 mm\u003c\/li\u003e \u003cli\u003eDisc Thickness: 32 mm\u003c\/li\u003e \u003cli\u003eMounting Type: V3\u003c\/li\u003e \u003cli\u003ePosition:\u0026nbsp;Front Left\u003c\/li\u003e \u003c\/ul\u003e ","brand":"PFC Brakes","offers":[{"title":"Default Title","offer_id":49176678203670,"sku":"319.044.63","price":36184.58,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/pfc-brake-disc.jpg?v=1785768621"},{"product_id":"hawk-htc4907-ventylovanyi-halmivnyi-rotor-diametr-12-6-diuima-vysota-1-71-diuima","title":"HAWK HTC4907 Vented rotor, 12.6 in. diameter, 1.71 in. height Talon Cross-Drilled and Slotted","description":"","brand":"HAWK","offers":[{"title":"Default Title","offer_id":49049449103638,"sku":"HTC4907","price":24186.29,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/image-coming-soon_20b4da47-93b2-4a87-b843-9026e230a44d.png?v=1785851565"},{"product_id":"hawk-htc4928-ventylovanyi-halmivnyi-dysk-diametr-11-81-diuima-vysota-2-26-diuima-talon-cross-drilled-and-slotted","title":"HAWK HTC4928 Vented rotor, 11.81 in. diameter, 2.26 in. height Talon Cross-Drilled and Slotted","description":"\u003ch2\u003eОпис HAWK HTC4928 Вентильований гальмівний диск, діаметр 11.81 дюйма, висота 2.26 дюйма Talon Cross-Drilled and Slotted\u003c\/h2\u003e \u003cp\u003eГальмівні диски Hawk Talon розроблені, оброблені, відшліфовані та покриті на сертифікованих за ISO підприємствах Північної Америки. Ці гальмівні диски виготовлені з чавуну марки 3000 і мають чорне покриття для відмінного захисту від корозії та легкого пригорання, що протистоїть задиркам.\u003c\/p\u003e \u003cp\u003eДиски оснащені прорізами та отворами для оптимізації теплової ефективності, відведення тепла та міцності, а також для покращення гальмування на мокрій поверхні. Гальмівні ротори Hawk Talon збалансовані і мають прецизійно фрезеровані прорізи для зменшення гармонічних резонансів.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eВиготовлені з чавуну марки 3000\u003c\/li\u003e \u003cli\u003eЧорне покриття забезпечує захист від корозії та легке пригорання\u003c\/li\u003e \u003cli\u003eПрорізи та отвори покращують теплову ефективність і гальмування на мокрій поверхні\u003c\/li\u003e \u003cli\u003eПрецизійно фрезеровані прорізи зменшують гармонічні резонанси\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eТехнічні характеристики:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eДіаметр гальмівного диска (мм): 300\u003c\/li\u003e\n\u003cli\u003eПокриття гальмівного диска: гальмівний диск з насічками та перфорацією\u003c\/li\u003e\n\u003cli\u003eВисота гальмівного диска (мм): 57,40\u003c\/li\u003e\n\u003cli\u003eКонструкція гальмівного диска: цільний\u003c\/li\u003e\n\u003cli\u003eСторона встановлення: ліва\/права\u003c\/li\u003e\n\u003cli\u003eМаксимальна товщина: 22\u003c\/li\u003e\n\u003cli\u003eМінімальна товщина: 20,40\u003c\/li\u003e\n\u003cli\u003eТип вентиляції: вентильований\u003c\/li\u003e\n\u003cli\u003eТип гальмівного диска: вентильований\u003c\/li\u003e\n\u003cli\u003eЯкість: преміум\u003c\/li\u003e\n\u003cli\u003eМатеріал: чавун\u003c\/li\u003e\n\u003cli\u003eКомплектація: 2x гальмівних диски\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAWK","offers":[{"title":"Default Title","offer_id":49049442189590,"sku":"HTC4928","price":17810.69,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/image-coming-soon_2f8e37fe-2b8e-423d-b217-8dd39f1415b2.png?v=1785862012"},{"product_id":"girodisc-ts-1001-4-tytanovi-termoplastyny-dlia-suportiv-evo-sti-gt500-front","title":"GIRODISC TS-1001-4 Titanium shields for Evo, STi, GT500 front","description":"","brand":"GIRODISC","offers":[{"title":"Default Title","offer_id":48282296156438,"sku":"TS-1001-4","price":6464.94,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/121905_Vhpn_TitaniumPadShields.jpg?v=1782995138"},{"product_id":"hardrace-6726-k-t-nyzhnikh-rehulovanykh-vazheliv-dlia-mitsubishi-evo-4-10-shs","title":"HARDRACE 6726 REAR TOE CONTROL ARM-ADJUSTABLE (PILLOW BALL) 2PCS\/SET EVO 4-10","description":"\u003cp\u003e\u003cstrong\u003e2 pcs. included\u003c\/strong\u003e\u003cbr\u003eThe rear levers allow you to fine tune the toe; Created from high-strength steel alloys that provide durability and strength, while remaining light; Levers provide stability, increasing controllability;\u003c\/p\u003e\u003col\u003e\u003cli\u003eEasy installation (bolt on);\u003c\/li\u003e\u003cli\u003eFor:\u003c\/li\u003e\u003cli\u003e\u003c\/li\u003e\u003cli\u003eMITSUBISHI LANCER EVOLUTION 7-9th CT9A\u003c\/li\u003e\u003cli\u003eMITSUBISHI LANCER EVOLUTION 5-6th CP9A\u003c\/li\u003e\u003cli\u003eMITSUBISHI LANCER EVOLUTION 4th CN9A\u003c\/li\u003e\u003cli\u003eMITSUBISHI LANCER EVOLUTION 10th CZ4A\u003c\/li\u003e\u003c\/ol\u003e","brand":"HARDRACE","offers":[{"title":"Default Title","offer_id":49288646492438,"sku":"6726","price":17213.98,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/36897-hardrace-6726-1_1e4028b4-c814-487d-bc8d-522f5c53f1db.jpg?v=1782995369"},{"product_id":"verkline-was-905-komplekt-rehulovanykh-zadnikh-vazheliv-dlia-rozvalu-dlia-mitsubishi-evo-4-5-6","title":"VERKLINE WAS-905 Adjustable Rear Camber Arms Kit for MITSUBISHI EVO 4 \/ 5 \/ 6","description":"\u003ch3\u003eThe kit consists of\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRear light aluminium rear camber arms (left and right).\u003c\/li\u003e \u003cli\u003eTwo M22x1.5 rod ends forged steel body, pre-loaded\u0026nbsp;tight\u0026nbsp;fit, motorsport quality.\u003c\/li\u003e \u003cli\u003eTwo M22 locking nuts.\u003c\/li\u003e \u003cli\u003eFour M20 teflon lined spherical plain bearings vibration\/resonance resistant.\u003c\/li\u003e \u003cli\u003eTwo rubber caps for rod ends protection.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eEasy camber adjustability extended with turnbuckle screw with adjustment possible with control arms mounted on the car.\u003c\/li\u003e \u003cli\u003eComes pre-assembled ready for fitment in the car.\u003c\/li\u003e \u003cli\u003eCan be used with standard rear subframe and uprights.\u003c\/li\u003e \u003cli\u003eGreater strength over OEM wishbones.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eTechnical details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFull 3D CAD designed.\u003c\/li\u003e \u003cli\u003eFEA Tested and additional reinforcement to the original design was made.\u003c\/li\u003e \u003cli\u003eManufactured on CNC from 7075 Aluminium.\u003c\/li\u003e \u003cli\u003eAnodized Black.\u003c\/li\u003e \u003c\/ul\u003e ","brand":"VERKLINE","offers":[{"title":"Default Title","offer_id":49509476532502,"sku":"WAS-905","price":46759.67,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/verkline-was-905-1_1_85f7c282-262f-4f59-8aa2-4dbed749e68d.jpg?v=1783365040"},{"product_id":"girodisc-a1-008-komplekt-perednikh-halmivnykh-dyskiv-dlia-mitsubishi-lancer-evo-6-9","title":"GIRODISC A1-008 Front Brake Rotor Kit for MITSUBISHI Lancer Evo 6-9","description":"The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 18.2lbs vs. 22lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr \/\u003e\u003cbr \/\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.\u0026nbsp; The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.\u0026nbsp; The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003cbr \/\u003e\u003cbr \/\u003eThe rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003cbr \/\u003e\u003cbr \/\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed. \u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDisc Finish: Straight Slotted\u003c\/li\u003e\u003cli\u003eDisc Vane Style: Curved Vane\u003c\/li\u003e\u003cli\u003eMaterial: Cast Iron\u003c\/li\u003e\u003cli\u003eDisc Type: Vented\u003c\/li\u003e\u003cli\u003eDisc Diameter (mm): 320\u003c\/li\u003e\u003cli\u003eMin Thickness (mm): 30,0\u003c\/li\u003e\u003cli\u003eMax Thickness (mm): 32,0\u003c\/li\u003e\u003cli\u003eDisc Height (mm): 45,0\u003c\/li\u003e\u003c\/ul\u003e","brand":"GIRODISC","offers":[{"title":"Default Title","offer_id":49703354237206,"sku":"A1-008","price":64649.4,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/brake-rotor-kit_84798215-7c34-41cb-8490-0292d9ed1ce3.jpg?v=1782989178"},{"product_id":"girodisc-a2-008-komplekt-zadnoho-halmivnoho-rotora-dlia-mitsubishi-lancer-evo-6-9","title":"GIRODISC A2-008 Rear Brake Rotor Kit for MITSUBISHI Lancer Evo 6-9","description":"The Girodisc system is a direct replacement for the original disc however \u003cstrong\u003ethe OEM pads along with some aftermarket brake pads will need to be modified before installation to work with our assemblies.\u003c\/strong\u003e This modification is necessary to accommodate the hardware arrangement of our two-piece discs and still retain the OEM parking brake and simply requires the backing plate of the brake pad to be ground down to match the arc of the pad material. A disclaimer and instructions for this modification are included with the discs. \u003cstrong\u003eAll brake pads sold by Girodisc for this application have already been modified on our CNC equipment for a plug and play solution.\u003c\/strong\u003e\u003cbr \/\u003e\u003cbr \/\u003eBy upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 12lbs vs. 14.5lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003cbr \/\u003e\u003cbr \/\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.\u0026nbsp; The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.\u0026nbsp; The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003cbr \/\u003e\u003cbr \/\u003eThe rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003cbr \/\u003e\u003cbr \/\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDisc Finish: Straight Slotted\u003c\/li\u003e\u003cli\u003eDisc Vane Style: Curved Vane\u003c\/li\u003e\u003cli\u003eMaterial: Cast Iron\u003c\/li\u003e\u003cli\u003eDisc Type: Vented\u003c\/li\u003e\u003cli\u003eDisc Diameter (mm): 300\u003c\/li\u003e\u003cli\u003eMin Thickness (mm): 20,0\u003c\/li\u003e\u003cli\u003eMax Thickness (mm): 22,0\u003c\/li\u003e\u003cli\u003eDisc Height (mm): 58,0\u003c\/li\u003e\u003c\/ul\u003e","brand":"GIRODISC","offers":[{"title":"Default Title","offer_id":49703354859798,"sku":"A2-008","price":64649.4,"currency_code":"UAH","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0766\/9887\/8230\/files\/brake-rotor-kit_46529b53-c7b9-418d-acd6-c1daa525031d.jpg?v=1782989251"}],"url":"https:\/\/atomic-shop.ua\/en\/collections\/mitsubishi-lancer-evolution-v-1998-1999.oembed?page=2","provider":"ATOMIC-SHOP Інтернет-магазин товарів для автоспорту та тюнінгу - UA","version":"1.0","type":"link"}